Render to Scale from Viewport
@Shawn wrote: Hi, My boss recently asked me to render and print that render 1 to 1 scale, how would I go about doing this. the purpose is to compare the render of a cosmetic bottle to the actual...
View ArticleMultiple materials/ adding material id's to Surfaces/Solids
@Shawn wrote: Hi, Guys I have to create a material that's plastic white on top, blue in the middle, and metallic on the bottom. I am coming from a 3ds max background so for me I would just separate...
View ArticleClik here to view.
HELP! Modeling nightmare
@Shawn wrote: Hi guys, I have this bottle cap I need to model and its driving me nuts, does anyone have any suggestions?? see attached images. Thanks,Shawn BOTTLE 1.jpg2448x3264 1.45 MB BOTTLE...
View ArticleDealing with big files in rhino
@Soccerfan1980 wrote: I have a file that is over 2 million kb and when I open the mesh layer of this model, my computer lags when moving and rotating. I was wondering what I need to do to my computer...
View ArticleRhino 6 WIP license on two computers?
@Hugason-Briem wrote: Dear McNeelers. I was wondering if the same rules apply to installing R6-WIP as Rhino 5, i.e. can I install it with the same license key on both my laptop and desktop computers....
View ArticleSolid cylinders
@solidtooldesigns wrote: I have a lot of issues when modifying cylinder shaped solids. Using move face, moveedge, gumball or SolidPts with cylinder shapes often creates bad geometry. Would also be...
View ArticleCalling anyone that uses Rhino and Inventor
@Steve1 wrote: Hi,V5 How have you adapted as its so totally different, even basic mouse usage. I am taking some steps into Inventor (also a NURBS prog and I am told its on a higher level when it comes...
View ArticlePerspective view no CPlane, cant create
@ShynnSup wrote: It seems this file has no cplane in the perspective viewport. I have tried reseting the viewports, setting the view again, and create a new cplane, with no success, they simply dont...
View ArticleIs there a way to move an object based on the previous moved object?
@ShynnSup wrote: I need to move many objects, each of them 1 more unit than the one before. Specifcally I need to move each curve 1 meter in z axis. So the first curve would move 1 metre, the second...
View ArticleClik here to view.
New user with a goal of CNC boat design
@Sancho wrote: Hi! Brand new user, limited experience with 3D modeling, no experience with CNC, never built a boat. Just had a very pleasant time working through a basic process modeling a hull and...
View ArticleSweep2 w/ Point as Rail
@davidcockey wrote: Sweep2 needs the capability to use a point as a rail (not just as a section). See the attached for an example where neither the other rail nor the sections are straight lines....
View ArticleProjecting open pit quarries with Rhino?
@poison wrote: Hi... I'm a civil engineer... I work on planing of open pit quarries... My starting point is a 3d model of a virgin soil or an already excavated quarry. The model is made with total...
View ArticleClik here to view.
Cannot flow object along surface
@Leonardo_G_Pate wrote: Hello guys, I am trying to flow this red model skin along this grey surface, but the patern won't cover in the right and linear way as it should. Some one could help? I really...
View ArticleWISH: add option in the _SplitFace (solid tools)
@davide76 wrote: Command "SplitFace" (Among the solid tools):beyond the option "curves", you could add a subdivision surface optin "isocurves", in the direction U, V, and both. It gets faster as well...
View ArticleClik here to view.
Create surfaces or solid
@wskad wrote: hello I would create two surfaces ( interior and exterior) with this contour but after have try many tools of Surface, I haven't a good result ws Two Surfaces or solid.jpg776x1159 116 KB...
View ArticleClik here to view.
Modeling a bike
@peter1 wrote: i am sure i will have problems so maybe its nice to do the work in progress here Pasted image1920x1080 426 KB Posts: 3 Participants: 2 Read full topic
View ArticleHelp please! :) G3 Continuity creates tons of Control Points
@mteic wrote: Hello guys,I am now modeling a 3D curve (kind of a 3D elipse) and I built it as follows;1) First I created the a surface which I can take section from2) I took a section and created my...
View ArticleClik here to view.
WISH: add "logarithmic spiral"
@davide76 wrote: You could be added between the various commands of the curves "logarithmic spiral"?Currently there is only one whose distances between the arms are straight (Archimede spiral). This...
View ArticleView your Rhino file anywhere on every device
@suqidan wrote: https://www.youtube.com/watch?v=Qbx43BNX5Wo` Posts: 2 Participants: 2 Read full topic
View ArticleVideo card crashes when running Rhino 5 with Windows 10
@Noah_Medley wrote: Hello, I am a Rhino 5 user, and have recently ran into an issue. I currently have an NVidia Geforce GTX 660 M video card with 2 GB of dedicated memory. While trying to run Rhino, I...
View Article