@siemen wrote:
Draw two boxes, one on top of the other like this
Activate MoveFace command and select the top of the bottom cube and the bottom of the top cube (so you have 2 surfaces which overlap selected)
Try moving both those faces down from one point to a lower point like this:
This is the result I get:
This is the result I expect:
Running 6.11.18348.17061, 12/14/2018
(I don’t dare updating yet with all the bugs related to 6.13 that I’ve been seeing on the forums.)
Posts: 6
Participants: 2
@rene1 wrote:
I have been exporting a lot of rhino drawings into .dxf. Most of the time no problem at all when i use R12 lines and arcs. Now somehow something is wrong. I can export and reopen it in rhino. The lines are then all white.
I cannot open it in my lasercutting software nor in librecad.
I had another one that did not show up in white line but which i could not open allso in librecad and the laser cutting software.
I will attach both files. I tried converting before exporting, different setting for R12 lines and arcs, other export schemes. Nothing seems to make a difference.
What is wrong here?achterframe 09-03-2019.dxf (46.3 KB)
Liggende achtervork 9-03-2019.dxf (159.6 KB)
Posts: 2
Participants: 2
@tony.yau wrote:
Rhino 6 cursor lags with SB2. Anyone found solution to this? I couldn’t find straigth forward solution to this.
Posts: 4
Participants: 2
@fven wrote:
Hi
I am trying to figure out, if there is an easy way to create an enclosing shell around multiple objects.
Case:
A large building model has been imported. which is made up of lots of objects, surfaces and so on. I would like to take all the exterior surfaces, and join them into one enclosing surface.
The best way I can explain it is, that I would like to put the model in a plastic bag, create a vacuum, and keep the plastic surface, now sticking to the objects in the bag.Any suggestions for doing this?
Thanks
Posts: 3
Participants: 2
@Rhino_Bulgaria wrote:
Currently, when selecting one or multiple objects, the command line shows text like:
“1 polysurface added to selection.”
or
“11 curve points, 1 curve, 1 surface, 2 polysurfaces added to selection”
However, there is a large unused space on the right side of this text that could be used in a clever way to show the select object’s name.
Of course, in the case of too many selected objects not all of them can be listed there (or they can, if these are arrows at either end of the object names /exactly like it’s done with the internet browsers when too many tabs are opened/, or a clickable “List” option in the command line that opens a vertical list of the selected objects that could be also copied in the system memory), but even if it’s limited to just showing several object names, that would be still much better than having nothing at all.
It is especially useful while selecting individual objects, because the user can easily see the object’s name at the command line rather than being forced to have the Properties window constantly opened, which heavily reduces the working area of the viewport.
A proposed version of this would look like this:
“11 curve points, 1 curve, 1 surface, 2 polysurfaces added to selection (“List all” “Filter”)”
Clicking on “List all” will open a separate window with vertical list of the selected objects and their names, as I mentioned above.
“Filter” will allow the user to choose whether the list will show the object names of all selected objects or only those of certain types of objects, such like polysurfaces, surfaces and extrusions, while the other object types like curves, points, meshes etc will not be listed, in order to make the list shorter and easier to read. Obviously, curve and surface points don’t have their dedicated names, so they are not shown in the list by default.If “List all” is clicked in the above example, it will show something like:
"Selected objects:
11 curve pointsCurves:
D-4-1Surfaces:
Stairs 25GPolysurfaces:
Pole 18
Frame x2Click to copy all names"
Selecting a single object will result in the following text in the command line that included its name in the brackets:
“1 polysurface added to selection (Door hinge 75-3a).”
Thanks,
Bobi
Posts: 2
Participants: 2
@Konrad.Kobayashi wrote:
Hi,
I am trying to export a normal map in “tangent-space” from an orthographic view.
My first idea was to use a “matcap”/environment map for a custom material like this:Than just save a screenshot/viewToFile.
I think it should work, but only in orthographic view, since with perspective, rays on the edge of the screen have different angles to the surface than those in the middle:
but with an orthographic view mode I get even more color shift:
how can i solve this problem? maybe a different way is easier,
1.I could render it with vray and the normals renderelement – but depending on the resolution could take a while
2.maybe theres a way with grasshopper: mesh > demesh> normals2color>construct mesh (but this would be worldspace)
3. some opengl shadermagic?thanksfor any input !
Posts: 2
Participants: 1
@msbob2010 wrote:
I have noticed that the Osnap menu has changed to the point where I cannot dock it to the bottom ribbon. Also the view port selection menu has disappeared from the bottom ribbon. Did I do something to cause this or was there a change in the latest release?
Posts: 3
Participants: 2
@AdamBBLee wrote:
After latest WIP 7 installation I have this message popping up each time I start WIP 7. In fact it has been happening since the previous build. I ignored it because I hardly use WIP 7 but now if I load V7 and close it and than start V6 I get updating toolbars message too. It looks like buggy V7 spills into V6 now. Interestingly enough, if I go with V6 without loading V7 first, PLEASE WAIT message won’t pop up.
Darius
Posts: 4
Participants: 2
@JimCarruthers wrote:
So I occasionally notice, usually when switching to Rhino but sometimes not, a strange lockup where Task Manager shows zero Rhino activity, it’s not that it’s busy “working.” It sees like there is a correlation with having YouTube on, and most often when my terrible Internet connection is having trouble keeping up. Is that plausible?
Posts: 1
Participants: 1
@diana.daoud wrote:
Hi,
Does anyone know how I go on about to model something similar to this (see img) but with my own design and spatial organization?
Posts: 1
Participants: 1
@pofusugi wrote:
Hi, I’m new to Rhino. I added decals on metal/glass/gem, but they are not showing. It shows on other materials. May I know if this is a bug or am I doing something wrong?
Windows 10, SR13 & 14. 200px png file.
Posts: 1
Participants: 1
@frank2 wrote:
Hi )
i need to convert an Adobe Illustrator path into a STP file, but didn’t see an online converter. I saw Rhino software can import Adobe Illustrator and export STP (Rhino Import / Export Formats, would somebody mind to help me out in this and convert some files for me ?
Here is the first one I have finished so far CW_05x10_01_03.ai (if shows as picture in browser, pls just download, its an .ai file), it has 1:1 size of ca. 10 cm x 10 cm.
Thanks a lot,
Frank
Posts: 2
Participants: 2
@barrento wrote:
When im working in layout and the detail views are put to display modes like rendered or technical drawing the layout performance is relativ slow. Moving textblocks or annotations are very sluggish.
If i change all viewport modes to wireframe everything is smooth.
Is there an workaround to speed this up or ist this a generall Rhino problem?Im Working with RH6 on a Win 10 Syste, with an Geforce GTX 1050 and an i-7700. So i think there is enough Performance on the hardware side.
Posts: 1
Participants: 1
@barrento wrote:
Hi is there a option to change the text size in the editor windor of the properties menu?
Posts: 1
Participants: 1
@diana.keshishyan wrote:
Hi can you help me
Rhino 6 SR13 2019-2-27 (Rhino 6, 6.13.19058.371, Git hash:master @ 17cd8b51accbe17dd04b48028f49d5e77a67f17b)
License type: Evaluation, build 2019-02-27
License details: Stand-Alone
Expires on: 2019-06-08Windows 7 SP1 (Physical RAM: 3.7Gb)
Machine name: DUET-ПКNon-hybrid graphics.
Primary display and OpenGL: Intel® HD Graphics (Intel) Memory: 2GB, Driver date: 7-31-2013 (M-D-Y). OpenGL Ver: 4.0.0 - Build 10.18.10.3262OpenGL Settings
Safe mode: Off
Use accelerated hardware modes: On
Redraw scene when viewports are exposed: OnAnti-alias mode: 4x
Mip Map Filtering: Linear
Anisotropic Filtering Mode: HeightVendor Name: Intel
Render version: 4.0
Shading Language: 4.00 - Build 10.18.10.3262
Driver Date: 7-31-2013
Driver Version: 10.18.10.3262
Maximum Texture size: 16384 x 16384
Z-Buffer depth: 24 bits
Maximum Viewport size: 16384 x 16384
Total Video Memory: 1939340 KBRhino plugins
C:\Program Files\Rhino 6\Plug-ins\Commands.rhp “Commands” 6.13.19058.371
C:\Program Files\Rhino 6\Plug-ins\rdk.rhp “Renderer Development Kit”
C:\Program Files\Rhino 6\Plug-ins\RhinoRender.rhp “Rhino Render”
C:\Program Files\Rhino 6\Plug-ins\rdk_etoui.rhp “RDK_EtoUI” 6.13.19058.371
C:\Program Files\Rhino 6\Plug-ins\rdk_ui.rhp “Renderer Development Kit UI”
C:\Program Files\Rhino 6\Plug-ins\NamedSnapshots.rhp “Snapshots”
C:\Program Files\Rhino 6\Plug-ins\RhinoCycles.rhp “RhinoCycles” 6.13.19058.371
C:\Program Files\Rhino 6\Plug-ins\Toolbars\Toolbars.rhp “Toolbars” 6.13.19058.371
C:\Program Files\Rhino 6\Plug-ins\3dxrhino.rhp “3Dconnexion 3D Mouse”
C:\Program Files\Rhino 6\Plug-ins\Displacement.rhp “Displacement”
Posts: 2
Participants: 2
@blazetron420 wrote:
Hello all,
I am having trouble utilizing Rhino/Fusion files (exported from rhino) and animating them in MAYA. The files will often come in fine, but the minute I animate them (rig them up) they completly fall apart. Obviously I have searched this problem, and there is alot of documentation about simply importing geometry, but making that geometry “animatable” is where the problem occurs. Any ideas would be great!
Thanks
Posts: 2
Participants: 2
@luke2 wrote:
Hi everyone,
I’m hoping to get a bit of help here. I’ve created several large scale sculptural seats in Rhino, the specific issue I’m having is that in one of the models, just one ‘segment’ of it will not open correctly in autocad. Neither will it import correctly into Solidworks apparently - the same segment is missing.
The model appears fine in Rhino, I can’t fathom what is wrong with it. It appears to export with no issue from Rhino, but upon opening in autocad for example, that segment is missing. Note I need to export the .dwg as a ‘solid’. It appears to be fine if solids = curves in the autocad scheme export options.
I’ve attached a stripped down version below, which is the piece that won’t export, and its neighbouring two pieces which are fine (like the other 50+ segments overall, which I’ve had no problems with).
Has anybody had this before or can help point me in a direction towards solving this issue?
Created in Rhino 5, up to date service release etc.Many thanks in advance,
LukeSculptural Seating - for forum.3dm (249.9 KB)
Posts: 10
Participants: 3
@sajid wrote:
Please check this attached file.
Export problem.3dm (491.1 KB)
Posts: 2
Participants: 1
